Individual
Freely programmable logic module: the basic module, together with the expansion modules for various power consumers, realises an individual room automation which coordinates sun shading, light and climate. Several standard functions in accordance with VDI 3813-2 and customer-specific functions make project planning and implementation easier.
Networked
Standardised data exchange: as a bus coupler, a basis module connects the room automation unit to a LON® or KNX network.
Intelligent
With the basic module MCM, complex functions such as annual shading, slat tracking according to the position of the sun or the implementation of a wind report are made possible.
- Freely parameterisable LonWorks® bus coupler
- Up to 8 different modules (BAline MIOs) can be mounted side-by-side in any order
- LonWorks® interface/USB interface
- Loading the application
- Monitoring the device application
- Changing data point values
- Functions:
- Flexible application with controllers, schedulers, matrices, logic modules etc.
- Flexible LonMark-compliant interface
- Separation of application and network interface
- Inputs/outputs of all modules mounted side-by-side can be represented by network variables
- Fixed software cycle time
- Creation of application software using the free BAline Studio software
Description
Value
Operating voltage
24 V DC
Connection type
Screw terminal
Degree of protection
IP 20
Safety class
III
Type of installation
DIN rail-mounted (REG)
Subassembly width
3 MW
BAline jumper for connecting to BAline modules
BAline line extension for connecting to BAline modules
Power supply unit for supplying extra low-voltage consumer loads
Power supply unit for supplying extra low-voltage consumer loads
USB cable for BAline programming