The expansion modules SMI (BAline MIO 16M230 SMI 8I, BAline MIO 16MDC SMI LoVo 8I) can be used to control up to 16 230 V SMI or SMI LoVo sun shading drives, independently of each other. The module prepares universal inputs for analogue and digital signals for a room automation unit.

Direct

Directly control sun shading drives with standard motor interface (SMI): expansion module SMI makes it possible to control and parameterise 16 SMI drives in a maximum of 16 groups, in order to precisely control the sun shading system.

Efficient

Saves power: the actuator can switch the SMI drive off with a relay in order to avoid long-term standby current consumption.

Universal

Inputs for a room automation unit: the expansion module SMI has universal inputs for analogue and digital signals. 
  • SMI Standard 3.0 certified
  • Individual control and parameterisation of up to 16 SMI or SMI LoVo drives in up to 16 groups
  • Integrated addressing of SMI motors
  • Individual drives are automatically addressed after replacement
  • Universal inputs
    • Analogue signals
      • 0–10 V DC
      • 0–20 mA
      • 4–20 mA
    • Digital signals
      • 24 V DC
    • Frequency input
      • 0-1000 Hz at 50 % duty cycle
    • PWN input
    • 4 inputs with connectable pull-up resistance as incremental encoder input
  • SMI drives can be switched off via integrated relay, prevents long-term standby current consumption
  • Power supply via jumper
 Article number: 2024345

Description

Value

Operating voltage

24 V DC

Connection type

Screw terminal

Switching capacity per drive

3600 VA

(Not fused, 16 drives)

SMI interface

Up to 16 x 24 V DC SMI LoVo drives

Input digital

8 x universal inputs

Degree of protection

IP 20

Safety class

II

Type of installation

DIN rail-mounted (REG)

Subassembly width

3 MW

BAline jumper for connecting to BAline modules

BAline line extension for connecting to BAline modules

Hardware to connect up to 12 drives with 2 separate supplies