The KNX actuator MSE 6M230 can be used to control up to 6 230 V sun shading drives or 8 power consumers (lights) via 8 outputs independently of each other.

Adjustable

Flexible use: WAREMA KNX actuators MSE 6M230 control up to six 230 V AC sun shading drives or 8 power consumers (light) across 8 outputs. Appropriate parameters are already pre-programmed and make setup easier.

User-oriented

During dwell time, the sun shading system remains in the position that the user has set. The settings are not overridden by a control mode.

Straightforward

Easy commissioning of KNX sun shading actuators thanks to the unique manual override operation via Bluetooth LE.
  • Individual control and parametrisation of up to 8 output channels
  • Possible combinations:
    • 6 x 230 V sun shading drives
    • 5 sun shading drives 230 V and 2 x lighting
    • 4 x 230 V sun shading drives and 4 x lighting
  • 12 integrated binary inputs for connecting standard (venetian blind) push buttons (binary inputs freely available on bus)
  • ETS adjustment options:
    • Preselection of output type for various sun shading products with preset basic parameters
    • Activation/deactivation of the automatic inputs with parameterisable automatic return function
    • Byte objects for length of the sun shading product and slat angle
    • Status of length of the sun shading product, slat angle and light
    • Parameterisable positions, can be stored via telegram
  • Emergency/manual operation using push buttons with integrated LEDs
 Article number: 1002632

Description

Value

Operating voltage

230 V AC

Connection type

Plug terminal

Switching capacity per drive

500 VA with 230 V AC / cos φ = 0.6

Total power light

2 kW with 230 V AC

Max. 500 W per output

1.5 kVA, 162 μF (fluorescent lamps)

Connecting line lenght max

200 m

Input digital

12 x binary inputs

Degree of protection

IP 30

Safety class

I

Type of installation

DIN rail-mounted (REG)

Subassembly width

12 MW