Comprehensive
Varied functionality with high operating comfort: the touch display adapts the graphics to the functions and simplifies the operation of sun shading products, light and temperature.
Combined
Compact central control unit: the WAREMA KNX Room Controller combines operating functions with a temperature sensor and a time switch.
Simple
Intuitive operation: touch display with simple graphic illustrations makes operation easier. Push buttons with symbols, sliders, or a position display are perfectly suited to the operation of sun shading products.
- Colour touch display, 2.3 inch (59 mm diagonally)
- Integrated temperature sensor with mixed value calculation
- Integrated weekly time switch
- Individual configuration of different display and operation sides
- Configurable display and operation sides:
- Up to 3 sun shading or window drives
- Push button
- Slider
- Position display
- Up to 3 lighting/switch/dim with percentage display
- Light
- HCL Human-Centric Lighting control
- Colour temperature setting
- RGB settings
- Up to 4 scenes
- Up to 4 universal display places (bus data)
- Temperature
- Display of measured value
- Regulation
- Mode switching
- Up to 3 sun shading or window drives
- Up to 4 inputs for binary contacts or temperature sensors T-NTC
- 8 AND logic gates and 8 OR logic gates with 4 inputs each
- PI regulator for heating and cooling (based on temperature)
- Suitable for each standard switch program
Description
Value
Operating voltage
KNX bus voltage
Power consumption
10 mA
Connection type
Plug terminal
Connecting line lenght max
10 m
Input digital
4 x binary input/temperature T-NTC
Degree of protection
IP 20
Type of installation
Flush-mounted (UP)
Inside temperature
-20 - 70 °C
Width
55 mm
Height
55 mm
Depth
35 mm
Cover frame for WAREMA KNX Room Controller