KNX technology refers to a manufacturer-independent standardised bus system for home and building automation systems that enables functional linking of different subsystems. With KNX, complex control requirements for sun shading systems, light and climate can be realised for advanced living and working environments of any size. WAREMA components can be integrated seamlessly into KNX networks. Numerous functions can be implemented with WAREMA KNX actuators; the parameters are perfectly matched to the requirements of the sun shading system. Slat tracking based on the position of the sun, including Cut-Off limitation, annual shading and the implementation of wind reports, is made possible with the BAline KNXMCM.

Versatile

Brings together a range of systems – sun shading, light, air conditioning, heating, and safety systems – under one roof, creating an optimal room climate.

Functional

Many functions can be performed with KNX. From position control to slat tracking based on the position of the sun and annual shading.

Convenient

Control via weather station, touch sensors, radio or conventional push buttons – centrally or automatically using intelligent sensors.
  • Sun shading control system for up to 8 facades (including slat tracking based on the sun's position)
  • Sends move commands, weather data and status information to the KNX device
  • Integrated GPS/GLONASS receiver for automated positioning
  • Measurement and evaluation of weather data:
    • Brightness
    • Dawn/dusk
    • Wind speeds
    • Wind direction
    • Precipitation
    • Global radiation
    • Temperature
    • Relative humidity
    • Atmospheric pressure
  • Calculation of further weather data: 
    • Absolute humidity
    • Perceived temperature
    • Comfort
    • Maximum value of the brightness sensors
  • Two limit values with adjustable hysteresis per sensor (including parameterisable switch-on and switch-off delay)
  • Teach-in function (assumption of the current measuring value)
  • 16 logic gates 
  • 4 blocking elements
  • Integrated heating
  • Self-monitoring including monitoring of the applied voltage (error messages can be sent to the bus)
  • Maintenance-free sensors
 Article number: 2035056

Description

Value

Operating voltage

24 V AC 24 V DC

Degree of protection

IP 44

Safety class

II

Type of installation

Surface-mounted (AP)

Photo

0 - 150 klx

Photo sensing range

360 °

Dawn / dusk

0 - 900 lx

Wind

0 - 40 m/s

Wind direction

1 - 360 °

Precipitation monitoring

Yes

Timer

GPS

Outside temperature

-30 - 60 °C

Humidity

0 - 100 %

Atmospheric pressure

300 - 1100 hPa

Global radiation

0 - 1300 W/m²

Width

130 mm

Height

68 mm

Depth

130 mm

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads