The WAREMA Modbus actuator 24 V can be used to control 4 sun shading drives with 24 V DC independently of each other. They integrate into an existing network with Modbus protocol and implement commands from a higher-level control.

Integrative

Integrate sun shading: WAREMA Modbus actuators 24 V implement move commands of a superordinate control and control 24 V DC sun shading drives with pole changer switching across 4 outputs.

Open

The open Modbus protocol links devices from a range of manufacturers. With WAREMA Modbus actuators 24 V, sun shading products can be integrated into an existing system which centrally controls the functions of various devices.

Simple

Straightforward connection: the actuator has inputs for standard push buttons. The operating mode is automatically adapted to the connected sun shading products.
  • Actuation of up to four 24 V sun shading drives with pole changer switching
  • Connection of drives possible with incremental encoder
  • Required connecting lines:
    • 24 V connecting line for supplying the actuator and the connected drives
    • 4-wire bus cable (Modbus)
  • Connection of conventional push buttons to local individual and group operation
  • Locking contacts to disable the drive (e.g. when windows are open)
 Article number: 2030960

Description

Value

Operating voltage

24 V DC

Output

4 x 24 V DC

Switching capacity per drive

72 W

Degree of protection

IP 30

Safety class

III

Type of installation

Surface-mounted (AP)

Width

158 mm

Height

180 mm

Depth

60 mm

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads