The Inside 1 UP motor control unit transmits move commands from central control units and push buttons to sun shading products with 24 V drives. The locking input prevents damage to the sun shading product when the windows are open.

Concealed

The motor control unit transfers commands of the central control unit or of the local push button to 24 V sun shading drives.

Logically operable

Fits the sun shading product: choose between permanent mode and time mode.

Lockable

Protective function: locking input locks the sun shading product when the window is open.
  • Direct control of a 24 V sun shading drive/window drive via a sun shading control system and a local push button.
  • Multiple motor control units can be combined into a group and controlled jointly with one push button.
  • In time mode, the MSE enters lock mode after the push button is pressed for approx. 2 seconds. Operating the push button briefly generates a tilting impulse (on slat products).
  • Locking input allows the sun shading drive to be locked, e.g. when a window is opened.
  • The operating voltage for the motor control unit must be generated in an external power supply unit.
 Article number: 1002670

Description

Value

Operating voltage

24 V DC

Control voltage

24 V DC

Output

24 V DC

Switching capacity per drive

8 A at 24 V DC

Logic behaviour

ZL

Degree of protection

IP 20

Safety class

III

Type of installation

Flush-mounted (UP)

Width

48.5 mm

Height

48.5 mm

Depth

20.4 mm

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads