The wind/photo sensor (1 facade) measures the wind speed and brightness. The information is transmitted to the central control unit, which compares the data with the limit values and automatically controls sun shading products. Ideal for monitoring a facade side.

Sensitive to brightness

180° brightness sensor: Sensor Wind/Photo (1 facade) covers a wide sensing range. 

Automated

The sensor records the brightness values for a central control unit which automatically raises and lowers the sun shading system with the dawn/dusk control or sun control.

Protective

The measured wind speed uses the central control unit to protect sun shading products from wind damage and to move them into a safe position if the limit values are exceeded.
  • Sensor measures:
    • Brightness using photo sensors
    • Wind speed using cup anemometer
  • Evaluation/display of data in the connected Wisotronic 2- to 4-channel
  • Connecting line (standard length of 3 m), can be extended to up to 200 m if necessary
  • Requires weather-proof line (suitable for outdoor installation) such as 6 x AWG 26 C UL (resistant to UV rays)
  • Installed using fixing bracket or pole
 Article number: 623133

Description

Value

Operating voltage

12 V DC

Degree of protection

IP 43

Safety class

III

Type of installation

Fixing bracket Pole

Photo

0 - 99 klx

Photo sensing range

180 °

Wind

0 - 25 m/s

Width

130 mm

Height

160 mm

Depth

130 mm

Pole adapter for fixing

  • Wind/Photo sensor
  • Weather station multisense
  • WAREMA Weather station pro and move
  • KNX secure Weather station pro