The WAREMA Weather station move records the outside temperature, wind speed, brightness, dawn/dusk and precipitation. The information is relayed to the Omnexo Central control unit. Here, the data are compared with the limit values and the sun shading products are controlled.

Comprehensive

Gets an overall picture of the weather situation: The weather station records measuring values for wind, precipitation and brightness and relays this data to the Omnexo Central control unit.

Protective

Using the data from the sensors, the safety functions of the Omnexo Central control unit protect the sun shading system from damage caused by wind, precipitation or ice.

Automated

The sensor records the brightness values and makes them available to the Omnexo Central control unit, which automatically raises and lowers the sun shading system with the dawn/dusk control or sun control.
  • Sensor measures:
    • Brightness
    • Dawn/dusk
    • Wind speed using cup anemometer
    • Precipitation
    • Outside temperature
  • Evaluation of weather data in the Omnexo Central control unit
  • Connecting line, can be extended to up to 200 m if necessary
  • Requires weather-proof line (suitable for outdoor installation) such as 4 x AWG 26 UL (resistant to UV rays)
  • Pluggable connection to the weather station
  • 24 V DC power supply provided by four-wire bus line
 Article number: 2047094

Description

Value

Operating voltage

24 V DC

Degree of protection

IP 43

Safety class

III

Type of installation

Fixing bracket Pole

Photo

0 - 100 klx

Photo sensing range

360 °

Dawn / dusk

0 - 500 lx

Wind

0 - 25 m/s

Precipitation monitoring

Yes

Outside temperature

-20 - 60 °C

Width

130 mm

Height

175 mm

Depth

130 mm

Connecting line 3 m for weather station multisense or WAREMA weather station move

Connecting line 10 m for weather station multisense or WAREMA weather station move