Flush-mounted radio receiver for directly controlling 230 V AC sun shading drives via an EWFS transmitter
Direct
Receives commands from all EWFS transmitters and sensors and directly controls a 230 V sun shading drive.
Compact
Installation in a flush-mounted box for an unobtrusive and uncomplicated assembly.
Brings elements together
Controls a drive which depends on a central control system or an EWFS transmitter.
- Permanent mode for controlling fabric products and roller shutters
- Power is supplied to the receiver by a 230 V connecting line
- Control possible with a sun shading control system, e.g. Wisotronic via a central input (230 V)
- Compact design enables installation in a flush-mounted box
- Suitable for use in small construction projects (up to approx. 30 units)
Description
Value
Operating voltage
230 V AC
Frequency
50 Hz
Control voltage
230 V AC
Output
230 V AC
Switching capacity per drive
max. 700 VA
Transmission frequency
433,92 MHz
Logic behaviour
PL
Run time up/down
3 minutes
Degree of protection
IP 20
Safety class
II
Type of installation
Flush-mounted (UP)
Width
49 mm
Height
49 mm
Depth
30 mm
Junction box without terminals