Direct
Controls up to 4 24 V sun shading drives or 8 power consumers.
Speed-regulated
Smooth raising and lowering: with or without speed regulation for internal sun shading systems and double-glazed facade venetian blind.
Ready to use
Set up the system quickly and safely: suitable parameters are preset at the factory for the different sun shading products and their applications.
- Actuation of up to four 24 V sun shading drives with reverse polarity switching
- Connection of drives with incremental encoder possible
- Required connecting lines:
- 24 V connecting line for supplying the actuator and the connected 24 V drives
- 4-wire bus cable (climabus)
- Connection of conventional push buttons to local individual and group operation (24 V)
- Locking contacts to disable the drive (e.g. when windows are open)
- Allocation of connected sensors when commissioning via control panel or WAREMA climatronic® studio
- Operating mode of local push buttons is automatically adjusted to the set product types
Description
Value
Operating voltage
24 V DC
Output
4 x 24 V DC
Switching capacity per drive
72 W at 24 V DC
Degree of protection
IP 30
Safety class
III
Type of installation
Surface-mounted (AP)
Width
158 mm
Height
180 mm
Depth
60 mm
Power supply unit for supplying extra low-voltage consumer loads
Power supply unit for supplying extra low-voltage consumer loads