The WAREMA climatronic® actuator 230 V can be used to control up to 6 230 V AC sun shading drives or 12 230 V AC power consumers independently of each other. 

Direct

Controls up to 6 230 V sun shading drives or 12 230 V power consumers.

Ready to use

Set up the system quickly and safely: suitable parameters are preset at the factory for the different sun shading products and their applications. 

Well air-conditioned

The actuator controls the sun shading system, lighting and other power consumers – automated by the WAREMA climatronic® control panel according to time of day, weather, and position of the sun.
  • Control of six 230 V sun shading drives or twelve 230 V power consumers (e.g. lighting)
  • Required connecting lines:
    • 230 V connecting line for supplying the actuator and the connected sun shading drives/power consumers
    • 4-wire bus cable (climabus)
  • Connection of conventional push buttons to local individual and group operation (24 V)
  • Locking contacts to disable the drive (e.g. when windows are open)
  • Allocation of connected sensors when commissioning via control panel or WAREMA climatronic® studio
  • Operating mode of local push buttons is automatically adjusted to the set product types
 Article number: 1002699

Description

Value

Operating voltage

230 V AC

Frequency

50 Hz

Output

6 x 230 V AC

Switching capacity per drive

500 VA with 230 V AC

Degree of protection

IP 30

Safety class

I

Type of installation

DIN rail-mounted (REG)

Subassembly width

12 MW